|
| |
Pressure Systems Safety
Regulations |
| |
Pipeline Safety Regulations |
| |
Gas Safety (Management)
Regulations |
| |
Control of Major Accident
Hazards Regulations |
| |
|
| |
| IGE/TD/1
Edition 4 |
Steel pipelines
for high pressure gas transmission |
| IGE/TD/1 Edition 4
Supp1 |
Handling,transport
and storage of steel pipe,bends and fittings |
| IGE/TD/12 Edition 2 |
Pipe work stress analysis
for gas industry plant |
| IGE/TD/13 |
Pressure regulating
installations for transmission and distribution systems |
| IGE/SR/9 Edition 2 |
Safe working practice
for pressure regulating installations |
| 1GE/SR/14 |
High pressure gas storage |
| IGE/SR/15 Edition 3 |
Programmable equipment
in safety related applications |
| IGE/SR/16 |
Storage of odorant
and use of odorant systems |
| 1GE/SR/18 Edition 2 |
Safe working practices
to ensure the integrity of gas pipelines and associated installations |
| IGE/SR/22 |
Purging operations
for fuel gases in transmission,distribution and storage |
| IGE/SR/23 |
Venting of natural
gas |
| IGE/SR/25 |
Hazardous area classification
of Natural Gas installations |
| IGE/SR/26 |
Horizontal directional
drilling and impact moling |
| 1GE/GM/4 |
Flow metering practice
for pressures between 38 and 250 bar |
| IGE/GM/7
Ed2 |
Electrical connections
and hazardous area classification for gas metering equipment |
| IGE/GL/2 |
Planning of Transmission
and Storage Systems Operating at pressures Exceeding 7bar |
| IGE/GL/5 |
Plant modification
procedure |
| IGE/GL/6 |
Non routine operations |
| IGE/GL/8 |
Reporting and investigation
of gas related incidents |
| |
|
|
| BS 21:1985 |
Specification for pipe
threads for tubes and fittings where pressure-tight joints are made on the
threads (metric dimensions) |
| BS 1179:1967 |
Glossary of terms used
in the gas industry |
| BS 2915:1990 |
Specification for bursting
discs and bursting disc devices |
| BS 4515-1 |
Specification for welding
of steel pipelines on land and offshore Carbon and Carbon manganese pipelines |
| BS 5351:1986 |
Specification for steel
ball valves for the petroleum, petrochemical and allied industries |
| BS 5353:1989 |
Specification for steel
plug valves |
| BS 5834-1:1985 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for guards, including foundation units |
| BS 5834-2:1983 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for small surface boxes |
| BS 5834-3:1985 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for large surface boxes |
| BS 5834-4:1989 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for preformed chambers |
| BS 6713-2:1986,
EN 26184-2:1991, ISO 6184-2:1985 |
Explosion protection
systems. Method for determination of explosion indices of combustible gases
in air |
| BS 8010-2.8:1992 |
Code of practice for
pipelines. Pipelines on land: design, construction and installation. Steel
for oil and gas |
| CP 2010-2:1970 |
Code of practice for
pipelines. Design and construction of steel pipelines in land |
| BS ISO 12213-1:1997 |
Natural gas. Calculation
of compression factors. Introduction and guidelines |
| BS ISO 12213-2:1997 |
Natural gas. Calculation
of compression factors. Calculation using a molar composition analysis |
| BS ISO 12213-3:1997 |
Natural gas. Calculation
of compression factors. Calculation using measured physical properties |
| BS ISO 14532:2001 |
Natural gas. Vocabulary |
| BS EN ISO 15761:2002 |
Steel gate, globe and
check valves for sizes DN 100 and smaller, for the petroleum and natural
gas industries |
| BS ISO/TS 16922:2002 |
Natural gas. Guidelines
for odorizing gases |
| BS EN 334:1999 |
Gas pressure regulators
for inlet pressures up to 100 bar |
| BS EN 1918-2:1998 |
Gas supply systems.
Underground gas storage. Functional recommendations for storage in oil and
gas fields |
| BS EN 1918-3:1998 |
Gas supply systems.
Underground gas storage. Functional recommendations for storage in solution-mined
salt cavities |
| BS EN 1918-4:1998 |
Gas supply systems.
Underground gas storage. Functional recommendations for storage in rock
caverns |
| BS EN 1918-5:1998 |
Gas supply systems.
Underground gas storage. Functional recommendations for surface facilities |
| BS EN 12186:2000 |
Gas supply systems.
Gas pressure regulating stations for transmission and distribution. Functional
requirements |
| BS EN 12583:2000 |
Gas supply systems.
Compressor stations. Functional requirements |
| BS EN 14870-1 |
Induction bends, fittings
and flanges for pipeline transportation systems |
| 00/708220 DC |
Specification and approval
of welding procedures for approval by a standard welding procedure |
| 01/708672 DC |
prEN 14141. Valves
for natural gas transportation in pipelines. Performance requirements and
tests |
| 02/710817 DC |
PD 8010-1. Code of
practice for pipelines. Part 1. Pipelines on land |
| 03/316975 DC |
ISO 15590-3. Petroleum
and natural gas industries. Induction bends, fittings and flanges for pipeline
transportation systems. Part 3. Flanges |
| BS EN 1514-1:1997 |
Flanges and their joints.
Dimensions of gaskets for PN-designated flanges. Non-metallic flat gaskets
with or without inserts |
| BS EN 1515-1:2000 |
Flanges and their joints.
Bolting. Selection of bolting |
| BS EN 1515-2:2001 |
Flanges and their joints.
Bolting. Classification of bolt materials for steel flanges, PN designated |
| BS EN 10289:2002 |
Steel tubes and fittings
for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified
coatings |
| BS EN 10290:2002 |
Steel tubes and fittings
for onshore and offshore pipelines. External liquid applied polyurethane
and polyurethane-modified coatings |
| BS EN 10301:2003 |
Steel tubes and fittings
for on and offshore pipelines. Internal coating for the reduction of friction
for conveyance of non corrosive gas |
| 96/709570 DC |
Steel tubes and fittings
for on and offshore pipelines. External three layer extruded polyethylene
based coatings (prEN 10285) |
| 96/709571 DC |
Steel tubes and fittings
for on and offshore pipelines. External three layer extruded polypropylene
based coatings (prEN 10286) |
| 96/709572 DC |
Steel tubes and fittings
for on and offshore pipelines. External fused polyethylene based coatings
(prEN 10287) |
| 97/705554 DC |
Pipe threads where
pressure-tight joints are made on the threads. Part 2. Verification by means
of limit gauges (ISO/DIS 7-2) |
| 98/711596 DC |
Steel tubes and fittings
for onshore and offshore pipelines. External coatings by bitumen or coal
tar derived materials (prEN 10300) |
| 98/711667 DC |
Steel tubes and fittings
for on shore and offshore pipelines. Internal lining with cement mortar
(prEN 10298) |
| 99/705626 DC |
EN 10310. Steel tubes
and fittings for onshore and offshore pipelines. Internal and external coating
with two layer coating with epoxy resin and polyamide based coating |
| 99/705627 DC |
EN 10309. Steel tubes
and fittings for onshore and offshore pipelines. External epoxy powder coating |
| 03/316975 DC |
ISO 15590-3. Petroleum
and natural gas industries. Induction bends, fittings and flanges for pipeline
transportation systems. Part 3. Flanges |
| BS EN ISO 11541:2002 |
Natural gas. Determination
of water content at high pressure |
| BS EN ISO
4126-2 |
Bursting disk safety
devices |
| BS EN ISO 15761:2002 |
Steel gate, globe and
check valves for sizes DN 100 and smaller, for the petroleum and natural
gas industries |
|
| API RP 5L1 |
Railroad transportation
of line pipe |
| API RP 5L2 |
Internal coating of
line pipe for non-corrosive gas transmission |
| API RP 5L3 |
Conducting drop-weight
tear tests on line pipe |
| API RP 5L7 |
Recommended practices
for unprimed internal fusion bonded epoxy coating of line pipe |
| API RP 5L8 |
Field inspection of
line pipe |
| API RP 5L9 |
External fusion bonded
epoxy coating of line pipe |
| API RP 5LW |
Transportation of line
pipe on barges and marine vessels |
| API SPEC 5L |
Specification for line
pipe |
| API SPEC 5LC |
Specification for CRA
line pipe |
| API SPEC 5LCP |
Specification for coiled
line pipe |
| API SPEC 5LD |
Specification for CRA
clad line pipe |
| API 5LS |
Spiral weld line pipe |
| API 5LU |
Ultra high/test treated
line pipe |
| API SPEC 6D |
Specification for pipeline
valves (ISO adoption from ISO 14313) |
| API 5LX |
High test line pipe |
| ASTMA A
269 |
Standard specification
for seamless and welded austenitic tubing for general services |
| ANSI B16.5 |
Pipe flanges and flanged
fittings |
| ANSI B16.11 |
Forge fittings, socket-welding
and threaded |
| ANSI B16.9 |
Factory made wrought
butt weld fittings |
| ANSI B16.20 |
Metallic gaskets for
pipe flanges-ring joints, spiral wound and jacketed |
| MSS SP 97 |
Integrally reinforced
forged branch outlet fittings-socket welding threaded and butt welding ends
|
| |
|
| |
|
| |
|
| |
|
| |
|
