|
|
Pressure
Systems Safety Regulations |
|
Gas Safety(Installation
and Use) Regulations |
|
The Factories Act |
|
Control of Major Accident
Hazards Regulations |
|
|
|
IGE/TD/3 Edition 4 |
Steel and PE pipelines
for gas distribution |
IGE/TD/3 Edition 4
Supp1 |
Handling,transport
and storage of PE pipe and fittings |
IGE/TD/4
Edition 3 |
Gas services |
IGE/TD/12 Edition 2 |
Pipe work stress analysis
for gas industry plant |
IGE/TD/13 |
Pressure regulating
installations for transmission and distribution systems |
IGE/TD/15 |
Services and metering
installations for a gas flow not exceeding 6m3/hr at supply MOP exceeding
75 mbar but not exceeding 2 bar |
IGE/SR/9 Edition 2 |
Safe working practice
for pressure regulating installations |
1GE/SR/10
Ed2 |
Dealing with escapes
of gas into underground plant |
IGE/SR/15 Edition 3 |
Programmable equipment
in safety related applications |
1GE/SR/18 Edition 2 |
Safe working practices
to ensure the integrity of gas pipelines and associated installations |
IGE/SR/20 |
Dealing with reported
gas escapes |
IGE/SR/22 |
Purging operations
for fuel gases in transmission,distribution and storage |
IGE/SR/23 |
Venting of natural
gas |
IGE/SR/25 |
Hazardous area classification
of Natural Gas installations |
1GE/GM/4 |
Flow metering practice
for pressures between 38 and 250 bar |
IGE/GM/5 Edition 2 |
Selection, installation
and use of electronic gas meter volume conversion systems |
IGE/GM/6 |
Specification for low
pressure diaphragm and rotary displacement meter installations with badged
meter capacities exceeding 6m3/h(212 ft3/h) but not exceeding 1076 m3/h
(38000 ft3/h) |
IGE/GM/7 Ed 2 |
Electrical connections
and hazardous area classification of gas metering equipment |
IGE/GM/8 Part 1 |
Non-domestic meter
installations Flow rate exceeding 6 cubic meters per hour and inlet pressures
not exceeding 38bar - Design |
IGE/GM/8 Part 2 |
Location housing and
compounds |
IGE/GM/8 Part 3 |
Installation and commissioning |
IGE/GM/8
Part 4 |
Operation and maintenance |
IGE/GM/8 Part 5 |
Notices and labels |
IGE/GL/1 |
Planning for gas distribution
systems operating at pressures not exceeding 7 bar |
IGE/GL/2 |
Planning of Transmission
and Storage Systems Operating at pressures Exceeding 7bar |
IGE/GL/5 |
Plant modification
procedures |
IGE/GL/6 |
Non routine operations |
IGE/UP/1 Edition 2 |
Strength and tightness
testing and direct purging of industrial and commercial gas installations |
IGE/UP/1A Ed 2 |
Strength and tightness
testing and direct purging of small low pressure industrial and commercial
gas installations |
IGE/UP/2 |
Gas installation pipe
work, boosters and compressors on industrial and commercial premises (with
amendments, January 1995) |
IGE/UP/3 |
Gas fueled spark ignition
and duel fuel engines |
IGE/UP/4 Edition 2 |
Commissioning of gas
fired plant on industrial and commercial premises |
IGE/UP/9
Ed2 |
Application of natural
gas and fuel oil systems to gas turbine and supplementary and auxiliary
fired burners |
IGE/UP/10 Edition 2 |
Installation of gas
appliances in industrial and commercial premises |
|
BS 10:1962 |
Specification for flanges
and bolting for pipes, valves, and fittings |
BS 21:1985 |
Specification for pipe
threads for tubes and fittings where pressure-tight joints are made on the
threads (metric dimensions) |
BS 61:1969 |
Specification for threads
for light gauge copper tubes and fittings |
BS 66 & 99:1970 |
Specification for cast
copper alloy pipe fittings for use with screwed copper tubes |
BS 341-1:1991 |
Transportable gas container
valves. Specification for industrial valves for working pressures up to
and including 300 bar |
BS 567:1973 |
Specification for asbestos-cement
flue pipes and fittings, light quality |
BS 669-1:1989 |
Flexible hoses, end
fittings and sockets for gas burning appliances. Specification for strip-wound
metallic flexible hoses, covers, end fittings and sockets for domestic appliances
burning 1st and 2nd family gases |
BS 669-2:1997 |
Flexible hoses, end
fittings and sockets for gas burning appliances. Specification for corrugated
metallic flexible hoses, covers, end fittings and sockets for catering appliances
burning 1st, 2nd and 3rd family gases |
BS 715:1993 |
Specification for metal
flue pipes, fittings, terminals and accessories for gas-fired appliances
with a rated input not exceeding 60 kW |
BS 746:1987 |
Specification for gas
meter unions and adaptors |
BS 835:1973 |
Specification for asbestos-cement
flue pipes and fittings, heavy quality |
BS 845-1:1987 |
Methods for assessing
thermal performance of boilers for steam, hot water and high temperature
thermal fluids |
BS 864-2:1983 |
Capillary and compression
tube fittings of copper and copper alloy. Specification for capillary and
compression fittings for copper tubes |
BS 864-3:1975 |
Capillary and compression
tube fittings of copper and copper alloy. Compression fittings for polyethylene
pipes |
BS 864-5:1990 |
Capillary and compression
tube fittings of copper and copper alloy. Specification for compression
fittings for polyethylene pipes with outside diameters to BS 5556 |
BS 1179:1967 |
Glossary of terms used
in the gas industry |
BS 1179-6:1980 |
Glossary of terms used
in the gas industry. Combustion and utilization including installation at
consumers' premises |
BS 1289-1:1986 |
Flue blocks and masonry
terminals for gas appliances. Specification for pre cast concrete flue blocks
and terminals |
BS 1306:1975 |
Specification for copper
and copper alloy pressure piping systems |
BS 1387:1985 |
Specification for screwed
and socketed steel tubes and tubular's and for plain end steel tubes suitable
for welding or for screwing to BS 21 pipe threads |
BS 1552:1995 |
Specification for open
bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar |
BS 1560:Part 2:1970 |
Circular flanges for
pipes, valves and fittings (Class designated). Specification for steel pipe
flanges (nominal sizes 1/2 in to 24 in). Metric dimensions |
BS 1560-3.1:1989 |
Circular flanges for
pipes, valves and fittings (Class designated). Steel, cast iron and copper
alloy flanges. Specification for steel flanges |
BS 2797:1976 |
Specification for leathers
for gas meter diaphragms |
BS 2915:1990 |
Specification for bursting
discs and bursting disc devices |
BS 3063:1965 |
Specification for dimensions
of gaskets for pipe flanges |
BS 3554:Part 1:1971 |
Specification for gas
governors. Independent governors for inlet pressures up to 25 mbar |
BS 3554:Part 2:1972 |
Specification for gas
governors. Independent governors for inlet pressures up to 350 mbar |
BS 4161:Part 3:1977 |
Specification for gas
meters. Unit construction meters of 6 cubic meters (or 212 cubic feet) per
hour rating |
BS 4161:Part 5:1977 |
Specification for gas
meters. Positive displacement diaphragm meters for pressures up to 7 bar |
BS 4161:Part 6:1979 |
Specification for gas
meters. Rotary displacement and turbine meters for gas pressures up to 100
bar |
BS 4201:1979 |
Specification for thermostats
for gas-burning appliances |
BS 4882:1990 |
Specification for bolting
for flanges and pressure containing purposes |
BS 5292:1980 |
Specification for jointing
materials and compounds for installations using water, low-pressure steam
or 1st, 2nd and 3rd family gases |
BS 5343-2:1991 |
Gas detector tubes.
Specification for long term gas detector tubes |
BS 5431:1976 |
Specification for bending
springs for use with copper tubes for water, gas and sanitation |
BS 5440-1:2000 |
Installation and maintenance
of flues and ventilation for gas appliances of rated input not exceeding
70 kW net (1st, 2nd and 3rd family gases). Specification for installation
and maintenance of flues |
BS 5440-2:2000 |
Installation and maintenance
of flues and ventilation for gas appliances of rated input not exceeding
70 kW net (1st, 2nd and 3rd family gases). Specification for installation
and maintenance of ventilation for gas appliances |
BS 5834-1:1985 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for guards, including foundation units |
BS 5834-2:1983 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for small surface boxes |
BS 5834-3:1985 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for large surface boxes |
BS 5834-4:1989 |
Surface boxes, guards
and underground chambers for gas and waterworks purposes. Specification
for preformed chambers |
BS 5864:1980 |
Code of practice for
the installation of gas-fired ducted-air heaters of rated input not exceeding
60 kW (2nd family gases) |
BS 5885-2:1987 |
Automatic gas burners.
Specification for packaged burners with input rating 7.5 kW up to but excluding
60 kW |
BS 5925:1991 |
Code of practice for
ventilation principles and designing for natural ventilation |
BS 5958-2:1991 |
Code of practice for
control of undesirable static electricity. Recommendations for particular
industrial situations |
BS 5978-1:1989 |
Safety and performance
of gas-fired hot water boilers (60 kW to 2 MW input). Specification for
general requirements |
BS 5978-2:1989 |
Safety and performance
of gas-fired hot water boilers (60 kW to 2 MW input). Specification for
additional requirements for boilers with atmospheric burners |
BS 5978-3:1989 |
Safety and performance
of gas-fired hot water boilers (60 kW to 2 MW input). Specification for
additional requirements for boilers with forced or induced draught burners |
BS 5864:1980 |
Code of practice for
the installation of gas-fired ducted-air heaters of rated input not exceeding
60 kW (2nd family gases) |
BS 5978:Part 1:1983 |
Safety and performance
of gas-fired hot water boilers (60kW to 2 MW input). Specification for general
requirements |
BS 5978:Part 2:1983 |
Safety and performance
of gas-fired hot water boilers (60 kW to 2 MW input). Specification for
additional requirements for boilers with atmospheric burners |
BS 5978:Part 3:1983 |
Safety and performance
of gas-fired hot water boilers (60kW to 2 MW input). Specification for additional
requirements for boilers with forced or induced draught burners |
BS 5986:1980 |
Specification for electrical
safety and performance of gas fired space heating appliances with inputs
60 kW to 2 MW |
BS 5990:1990 |
Specification for direct
gas-fired forced convection air heaters with rated heat inputs up to 2 MW
for industrial and commercial space heating: safety and performance requirements
(excluding electrical requirement) (2nd family gases) |
BS 5991:1983 |
Specification for indirect
gas fired forced convection air heaters for space heating (60 kW up to 2
MW input): safety and performance requirements (excluding electrical requirements)
(2nd family gases) |
BS 6047-1:1981 |
Flame supervision devices
for domestic, commercial and catering gas appliances. Specification for
heat sensitive type |
BS 6173:2001 |
Specification for installation
of gas-fired catering appliances for use in all types of catering establishments
(2nd and 3rd family gases) |
BS 6230:1991 |
Specification for installation
of gas-fired forced convection air heaters for commercial and industrial
space heating (2nd family gases) |
BS 6350:1983 |
Specification for gas
heated fish and chip frying ranges |
BS 6400:1997 |
Specification for installation
of domestic sized gas meters (2nd and 3rd family gases) |
BS 6400-1:2002 |
Specification for installation
of domestic-sized gas meters maximum rated capacity not exceeding 6 m3/h
(2nd and 3rd family gases). Low pressure (2nd family gases) |
BS 6448:1995 |
Specification for gas
appliance governors of DN greater than 50 and for inlet pressures up to
200 mbar |
BS 6644:1991 |
Specification for installation
of gas-fired hot water boilers of rated inputs between 60 kW and 2 MW (2nd
and 3rd family gases) |
BS 6713-2:1986, EN
26184-2:1991, ISO 6184-2:1985 |
Explosion protection
systems. Method for determination of explosion indices of combustible gases
in air |
BS 6798:2000 |
Specification for installation
of gas-fired boilers of rated input not exceeding 70 kW net |
BS 6891:1998 |
Specification for installation
of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd
family gas) |
BS 6896:1991 |
Specification for installation
of gas-fired overhead radiant heaters for industrial and commercial heating
(2nd and 3rd family gases) |
BS 6956-5:1992 |
Jointing materials
and compounds. Specification for jointing compounds for use with water,
low pressure saturated steam, 1st family gases (excluding coal gas) and
2nd family gases |
BS 6959:1988 |
Code of practice for
selection, installation, use and maintenance of apparatus for the detection
and measurement of combustible gases (other than for mining applications
or explosives processing and manufacture) |
BS 7190-1989 |
Methods for assessing
thermal performance of low temperature hot water boilers using a test rig |
BS 7336:1990 |
Specification for polyethylene
fusion fittings with integral heating element(s) for use with polyethylene
pipes for the conveyance of gaseous fuels |
BS 7461:1991 |
Specification for electrically
operated automatic gas shut-off valves fitted with throughput adjusters,
proof of closure switches, closed position indicator switches or gas flow
control |
BS 7721:1994, ISO 10494:1993 |
Gas turbines and gas
turbine sets. Measurement of emitted airborne noise. Engineering/survey
method |
BS 7834:1995, ISO 9951:1993 |
Specification for turbine
meters used for the measurement of gas flow in closed conduits |
BS 7838:1996 |
Specification for corrugated
stainless steel semi-rigid pipe and associated fittings for low-pressure
gas pipework of up to 28 mm |
BS 7859:1996, ISO 6976:1995 |
Natural gas. Calculation
of calorific values, density, relative density and Wobbe index from composition |
BS 7860:1996 |
Specification for carbon
monoxide detectors (electrical) for domestic use |
BS 7965:2000 |
The selection, installation,
operation and calibration of diagonal path transit time ultrasonic flowmeters
for industrial gas applications |
BS ISO 8085-1:2001 |
Polyethylene fittings
for use with polyethylene pipes for the supply of gaseous fuels. Metric
series. Specifications. Fittings for socket fusion using heated tools |
BS ISO 8085-2:2001 |
Polyethylene fittings
for use with polyethylene pipes for the supply of gaseous fuels. Metric
series. Specifications. Spigot fittings for butt fusion, for socket fusion
using heated tools and for use with eletrofusion fittings |
BS ISO 8085-3:2001 |
Polyethylene fittings
for use with polyethylene pipes for the supply of gaseous fuels. Metric
series. Specifications. Electrofusion fittings |
BS ISO 10838-1:2000 |
Mechanical fittings
for polyethylene piping systems for the supply of gaseous fuels. Metal fittings
for pipes of nominal outside diameter less than or equal to 63mm |
BS ISO 10838-2:2000 |
Mechanical fittings
for polyethylene piping systems for the supply of gaseous fuels. Metal fittings
for pipes of nominal outside diameter greater than 63mm |
BS ISO 10838-3:2001 |
Mechanical fittings
for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic
fittings for pipes of nominal outside diameter less than or equal to 63mm |
BS ISO 14531-1:2002 |
Plastics pipes and
fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance
of gaseous fuels. Metric series. Specifications. Pipes |
BS ISO 14532:2001 |
Natural gas. Vocabulary |
BS EN ISO 3977-5:2003 |
Gas turbines. Procurement.
Applications for petroleum and natural gas industries |
BS EN ISO 4080:1995 |
Rubber and plastics
hoses and hose assemblies. Determination of permeability to gas |
BS EN ISO
6570 |
Natural gas, determination
of potential hydrocarbon content, gravimetric methods |
BS EN ISO 15761:2002 |
Steel gate, globe and
check valves for sizes DN 100 and smaller, for the petroleum and natural
gas industries |
BS IEC 62086-1:2001,
IEC 62086-1:2001 |
Electrical apparatus
for explosive gas atmospheres. Electrical resistance trace heating. General
and testing requirements |
BS IEC 62086-2:2001,
IEC 62086-2:2001 |
Electrical apparatus
for explosive gas atmospheres. Electrical resistance trace heating. Application
guide for design, installation and maintenance |
BS IEC 62086-1:2001,
IEC 62086-1:2001 |
Electrical apparatus
for explosive gas atmospheres. Electrical resistance trace heating. General
and testing requirements |
BS EN 26:1998 |
Gas-fired instantaneous
water heaters for the production of domestic hot water, fitted with atmospheric
burners |
BS EN 88:1991 |
Pressure governors
for gas appliances for inlet pressures up to 200 mbar |
BS EN 125:1991 |
Specification for flame
supervision devices for gas-burning appliances. Thermo-electric types |
BS EN 126:1995 |
Multifunctional controls
for gas burning appliances |
BS EN 161:2002 |
Automatic shut-off
valves for gas burners and gas appliances |
BS EN 203-2:1995 |
Specification for gas
heated catering equipment. Rational use of energy |
BS EN 257:1992 |
Mechanical thermostats
for gas-burning appliances |
BS EN 278:1991 |
Specification for rubber
materials for diaphragms in domestic appliances using combustible gases
up to 200 mbar |
BS EN 279:1991 |
Specification for homogenous
rubber materials for dynamic seals in domestic appliances using combustible
gases up to 200 mbar |
BS EN 286-1 |
Simple unified pressure
vessels designed to contain nitrogen/oxygen |
BS EN 291:1992 |
Rubber seals. Static
seals in domestic appliances for combustible gas up to 200 mbar. Specification
for material |
BS EN 297:1994 |
Gas-fired central heating
boilers. Type B11 and B11BS boilers fitted with atmospheric burners of nominal
heat input not exceeding 70 kW |
BS EN 298:1994 |
Automatic gas burner
control systems for gas burners and gas burning appliances with or without
fans |
BS EN 298:2003 |
Automatic gas burner
control systems for gas burners and gas burning appliances with or without
fans |
BS EN 303-2: |
Heating boilers with
forced draught burners. Atomized oil burners. |
BS EN 303-3: |
Heating boilers with
forced draught burners. Gas-fired central heating boilers. |
BS EN 331:1998 |
Manually operated ball
valves and closed bottom taper plug valves for gas installations in buildings |
BS EN 334:1999 |
Gas pressure regulators
for inlet pressures up to 100 bar |
BS EN 416-1:1999 |
Single burner gas-fired
overhead radiant-tube heaters. Safety |
BS EN 419-1:2000 |
Non-domestic gas-fired
overhead luminous radiant heaters. Safety |
BS EN 483:2000 |
Gas-fired central heating
boilers. Type C boilers of nominal heat input not exceeding 70 kW |
BS EN 621:1998 |
Non-domestic gas-fired
forced convection air heaters for space heating not exceeding a net heat
input of 300 kW, without a fan to assist transportation of combustion air
and/or combustion products |
BS EN 625:1996 |
Gas-fired central heating
boilers. Specific requirements for the domestic hot water operation of combination
boilers of nominal heat input not exceeding 70 kW |
BS EN 549:1995 |
Specification for rubber
materials for seals and diaphragms for gas appliances and gas equipment |
BS EN 525:1998 |
Non-domestic direct
gas-fired forced convection air heaters for space heating not exceeding
a net heat input of 300 kW |
BS EN 656:2000 |
Gas-fired central heating
boilers. Type B boilers of nominal heat input exceeding 70 kW but not exceeding
300 kW |
BS EN 677:1998 |
Gas-fired central heating
boilers. Specific requirements for condensing boilers with a nominal heat
input not exceeding 70 kW |
BS EN 751-1:1997 |
Sealing materials for
metallic threaded joints in contact with 1st, 2nd and 3rd family gases and
hot water. Anaerobic jointing compounds |
BS EN 751-2:1997 |
Sealing materials for
metallic threaded joints in contact with 1st, 2nd and 3rd family gases and
hot water. Non-hardening jointing compounds |
BS EN 751-3:1997 |
Sealing materials for
metallic threaded joints in contact with 1st, 2nd and 3rd family gases and
hot water. Unsintered PTFE tapes |
BS EN 777-1:1999 |
Multi-burner gas-fired
overhead radiant tube heater systems for non-domestic use. System D, safety |
BS EN 777-2:1999 |
Multi-burner gas-fired
overhead radiant tube heater systems for non-domestic use. System E, safety |
BS EN 777-3:2000 |
Multi-burner gas-fired
overhead radiant tube heater systems for non-domestic use. System F, safety |
BS EN 777-4:1999 |
Multi-burner gas-fired
overhead radiant tube heater systems for non-domestic use. System H, safety |
BS EN 1020:1998 |
Non-domestic
gas-fired forced convection air heaters for space heating not exceeding
a net heat input of 300 kW, incorporating a fan to assist transportation
of combustion air and/or combustion products |
BS EN 1254-1:1998 |
Copper and copper alloys.
Plumbing fittings. Fittings with ends for capillary soldering or capillary
brazing to copper tubes |
BS EN 1254-2:1998 |
Copper and copper alloys.
Plumbing fittings. Fittings with compression ends for use with copper tubes |
BS EN 1254-3:1998 |
Copper and copper alloys.
Plumbing fittings. Fittings with compression ends for use with plastics
pipes |
BS EN 1254-4:1998 |
Copper and copper alloys.
Plumbing fittings. Fittings combining other end connections with capillary
or compression ends |
BS EN 1254-5:1998 |
Copper and copper alloys.
Plumbing fittings. Fittings with short ends for capillary brazing to copper
tubes |
BS EN 1266:2002 |
Independent gas-fired
convection heaters incorporating a fan to assist transportation of combustion
air and/or flue gases |
BS EN 1359:1999 |
Gas meters. Diaphragm
gas meters |
BS EN 1514-1:1997 |
Flanges and their joints.
Dimensions of gaskets for PN-designated flanges. Non-metallic flat gaskets
with or without inserts |
BS EN 1515-1:2000 |
Flanges and their joints.
Bolting. Selection of bolting |
BS EN 1515-2:2001 |
Flanges and their joints.
Bolting. Classification of bolt materials for steel flanges, PN designated |
BS EN 1593:1999 |
Non-destructive testing.
Leak testing. Bubble emission techniques |
BS EN 1643:2000 |
Valve proving systems
for automatic shut-off valves for gas burners and gas appliances |
BS EN 1680:1997, BS
2782-11:Method 1133A:1997 |
Plastics piping systems.
Valves for polyethylene (PE) piping systems. Test method for leaktightness
under and after bending applied to the operating mechanism |
DD ENV 1954:1997 |
Internal and external
fault behavior of safety related electronic parts of gas appliances |
BS EN 10241:2000 |
Steel threaded pipe
fittings |
BS EN 10284:2000 |
Malleable cast iron
fittings with compression ends for polyethylene (PE) piping systems |
BS EN 12007-1:2000 |
Gas supply systems.
Pipelines for maximum operating pressure up to and including 16 bar. General
functional recommendations |
BS EN 12007-2:2000 |
Gas supply systems.
Pipelines for maximum operating pressure up to and including 16 bar. Specific
functional recommendations for polyethylene (MOP up to and including 10
bar) |
BS EN 12007-3:2000 |
Gas supply systems.
Pipelines for maximum operating pressure up to and including 16 bar. Specific
functional recommendations for steel |
BS EN 12007-4:2000 |
Gas supply systems.
Pipelines for maximum operating pressure up to and including 16 bar. Specific
functional recommendations for renovation |
BS EN 12078:1998 |
Zero governors for
gas burners and gas burning appliances |
BS EN 12083:1998 |
Respiratory protective
devices. Filters with breathing hoses, (non-mask mounted filters). Particle
filters, gas filters, and combined filters. Requirements, testing, marking |
BS EN 12186:2000 |
Gas supply systems.
Gas pressure regulating stations for transmission and distribution. Functional
requirements |
BS EN 12261:2002 |
Gas meters. Turbine
gas meters |
BS EN 12279:2000 |
Gas supply systems.
Gas pressure regulating installations on service lines. Functional requirements |
BS EN 12327:2000 |
Gas supply systems.
Pressure testing, commissioning and decommissioning procedures. Functional
requirements |
BS EN 12405:2002 |
Gas meters. Gas-volume
electronic conversion devices |
BS EN 12419:1999 |
Respiratory protective
devices. Light duty construction compressed airline breathing apparatus
incorporating a full face mask, half mask or quarter mask. Requirements,
testing, marking |
BS EN 12480:2002 |
Gas meters. Rotary
displacement gas meters |
BS EN 12669:2000 |
Direct gas-fired hot
air blowers for use in greenhouses and supplementary non-domestic space
heating |
BS EN 12874:2001 |
Flame arresters. Performance
requirements, test methods and limits for use |
BS EN 12953-7:2002 |
Shell boilers. Requirements
for firing systems for liquid and gaseous fuels for the boilers |
BS EN 13182:2002 |
Ventilation for buildings.
Instrumentation requirements for air velocity measurements in ventilated
spaces |
BS EN 13185:2001 |
Non-destructive testing.
Leak testing. Tracer gas method |
BS EN 13278:2003 |
Open fronted gas-fired
independent space heaters |
BS EN 13410:2001 |
Gas-fired overhead
radiant heaters. Ventilation requirements for non-domestic premises |
BS EN 13423:2000 |
Compressed natural
gas vehicle operations |
BS EN 13611:2000 |
Safety and control
devices for gas burners and gas-burning appliances. General requirements |
BS EN 13774:2003 |
Valves for gas distribution
systems with maximum operating pressure less than or equal to 16 bar. Performance
requirements |
BS EN 13786 |
Automatic changeover
valves for LPG: Supersedes BS 3016 |
BS EN 13787:2001 |
Elastomers for gas
pressure regulators and associated safety devices for inlet pressures up
to 100 bar |
BS EN 14129:2004
|
Pressure relief valves
for LPG tanks |
DD ENV 14236:2002 |
Ultrasonic domestic
gas meters |
BS EN 14324 |
Brazing guidance on
the application of brazed joints |
BS EN 14382:2002 |
Safety devices for
gas pressure regulating stations and installations. Gas safety shut-off
devices for operating pressure up to 100 bar |
BS EN 50379-2 |
Combustion gas measurement,
performance requirements for instruments used in statutory inspections and
assessments |
BS EN 50379-3 |
Combustion gas measurement,
performance requirements for instruments used in non-statutory servicing
of gas fired heating appliances |
BS EN 60079-7:2003 |
Electrical apparatus
for explosive gas atmospheres. Increased safety "e" |
BS EN 60079-10:2003 |
Electrical apparatus
for explosive gas atmospheres. Classification of hazardous areas |
BS EN 60079-14:2003 |
Electrical apparatus
for explosive gas atmospheres. Electrical installations in hazardous areas
(other than mines) |
BS EN 60079-15:2003 |
Electrical apparatus
for explosive gas atmospheres. Type of protection "n" |
BS EN 60079-17:2003 |
Electrical apparatus
for explosive gas atmospheres. Inspection and maintenance of electrical
installations in hazardous areas (other than mines) |
BS EN 60423:1995 |
Conduits for electrical
purposes. Outside diameters of conduits for electrical installations and
threads for conduits and fittings |
DD ENV 1259-1:1994 |
Single burner gas fired
overhead radiant tube heaters and non-domestic gas-fired overhead luminous
radiant heaters. Requirements and test methods for establishing the rational
use of energy. Radiometric method A |
DD ENV 1259-2:1997 |
Single burner gas fired
overhead radiant tube heaters and non-domestic gas-fired overhead luminous
radiant heaters. Requirements and test methods for establishing the rational
use of energy. Radiometric method B |
DD ENV 1259-3:1997 |
Single burner gas fired
overhead radiant tube heaters and non-domestic gas-fired overhead luminous
radiant heaters. Requirements and test methods for establishing the rational
use of energy. Radiometric method C |
93/706481 DC |
ISO/DIS 5752. Metal
valves for use in flanged pipe systems. Face-to-face and centre to face
dimensions (ISO/DIS 5752) |
97/705554 DC |
Pipe threads where
pressure-tight joints are made on the threads. Part 2. Verification by means
of limit gauges (ISO/DIS 7-2) |
98/706158 DC |
Automatic gas burner
control systems for gas burners and gas burning appliances with or without
fans |
00/704782 DC |
Code of practice for
measurement of carbon monoxide and carbon dioxide in buildings and from
gas-fired appliances by use of electronic portable combustion gas analysers |
00/705373 DC |
prEN 13836. Gas-fired
central heating boilers. Type B boilers of nominal heat input exceeding
300 kW but not exceeding 1000 kW |
01/123802 DC |
BS ISO 14531-2. Plastics
pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the
transport of gaseous fuels. Metric series. Specifications. Part 2. Fittings
for heat fusion jointing |
01/708672 DC |
prEN 14141. Valves
for natural gas transportation in pipelines. Performance requirements and
tests |
01/712349 DC |
BS EN 416-2. Single
burner gas-fired overhead radiant tube heaters for non-domestic use. Part
2. Rational use of energy |
01/712350 DC |
BS EN 419-2. Non-domestic
gas-fired overhead luminous radiant heaters. Part 2. Rational use of energy |
02/121565 DC |
BS EN 14408-1. Plastics
piping systems for the renovation of underground gas supply networks. Part
1: General |
02/121566 DC |
BS EN 14408-3. Plastics
piping systems for the renovation of underground gas supply networks. Part
3: Lining with close-fit pipes |
02/701697 DC |
Revision of BS 715.
Specification for metal flue boxes for gas fired appliances not exceeding
20 kW |
02/704841 DC |
BS 5864. Specification
for installation in domestic premises of gas-fired ducted-air heaters of
rated input not exceeding 70 kW net |
02/705329 DC |
prEN 14438. Gas-fired
insets for heating more than one room |
02/705734 DC |
ISO/DIS 17292. Metal
ball valves for petroleum, petrochemical and allied industries |
02/707217 DC |
prEN 203-1. Gas heated
catering equipment. Part 1: General safety rules |
02/711048 DC |
EN ISO 10434. Bolted
bonnet steel gate valves for the petroleum and natural gas industries |
02/714116 DC |
BS 6230:1991. Installation
of gas-fired forced convection air convection air heaters for commercial
and industrial space heating (2nd and 3rd family gases) |
03/310073 DC |
EN 203-2-9. Gas heated
catering equipment. Part 2-9. Specific requirements. Solid tops, warming
plates and griddles |
03/310868 DC |
BS 6644. Specification
for installation of gas-fired hot water boilers of rated inputs between
70kW (net) and 2MW (gross) (2nd and 3rd family gases) |
03/316450 DC |
EN 203-2-4. Gas heated
catering equipment. Part 2-4. Specific requirements. Fryers |
03/316460 DC |
EN 203-2-8. Gas heated
catering equipment. Part 2-8. Specific requirements. Brat pans and padlla |
03/318125 DC |
EN 14829. Independent
gas-fired flueless space heaters for nominal heat input not exceeding 6
kW |
PD 6579:1995, CR 1749:1995 |
European scheme for
the classification of gas appliances according to the method of evacuation
of the products of combustion (types) |
PD CR 1749:2001 |
European scheme for
the classification of gas appliances according to the method of evacuation
of the products of combustion (Types) |
PD CR 13737:2000 |
Implementation guide
for functional standards prepared by CEN/TC 234 'Gas supply' |
DD 221:1997, CR 1472:1997 |
General guidance for
the marking of gas appliances |
TH 42080 |
Gas Supply Characteristics
and Appliance Approval. An International survey |
TH 42081 |
Gas Equipment and Appliances.
A guide to European Economic Area requirements |
TH 42091 |
CE Marking for Pressure
Equipment. A guide to the European Directive |
|
|
|
|
|
|
|
|
|
|
|